In Stock

NANO-HYBRID TRADITIONAL STAIN

Coverage:
1 gallon (3.8 Liters) covers approximately 400-700 sq. ft. (2 coats) depending on application method and surface conditions.

Color Disclaimer:
Please note that the color swatches shown on this website are intended to serve as a close representation only. Actual colors may vary due to a variety of factors. Click here to read the full disclaimer.

How many gallon(s) do I need for my project?

It will depend on the square footage of your application.

A. Dimensions of surface:

feet long by
feet wide.

B. Number of coats:

SKU: N/A Category:

Classic Water-based Nano-Hybrid Stain is a water-based acrylic polymer emulsion, formulated for easy application and beautification of concrete and masonry surfaces. The oxides become a permanent part of the substrate. The resulting effect creates a more opaque finish. For example, the formation of iron oxide will produce a reddish-brown mottled rust color. Considerable variations in color and tone normally result from the use of Classic Stain. Many special color effects may be achieved using different application techniques. Classic’s color stain provides a natural art deco look over old and new surfaces, interior and exterior. Classic Custom Waterbase Stain is an environmentally friendly alternative to acid stains. New concrete must cure for 28 days before application.

ADVANTAGES

  • Protects and preserves against wear and
    exposure when sealed
  • Multiple colors can be used for more
    interesting finishes
  • Complies with all applicable air quality
    management regulations – Zero VOC
  • All colors can be used interior and exterior
  • Compared to acid stain there’s no fumes.
    No neutralization required and
    Non-hazardous shipping
  • Low cost, easy install & low maintenance

LIMITATIONS

  • If a semi-transparent finish is desired,
    Classic FX Nano is recommended
  • Not for use on self-leveling cement or light
    weight concrete. We recommend Classic FX2,
    Acid Stain, or Nano-Infused Dye.
  • Must be installed over a clean dry surface. After
    sealing, let cure for 5 days before parking on it.
  • Moisture & efflorescence must be removed
    with Classic Densifier for a clean dry surface.
  • All surfaces must be cleaned with Super EcoEtch, power washed & rinsed well with water.
    Surface should feel like it is under 100 grit
    sandpaper.
  • Never apply adhesives over stained or sealed
    surfaces. May cause damage.

 

TYPICAL USAGE

Nano-Hybrid Traditional Water Base Stain Classic Water Based Stain can be used anywhere architectural concrete is desired. Both interior and exterior, on almost any cementitious surface, whether it be gray or color harden concrete, stamped or textured concrete, micro-toppings or overlays. It can be used as
an entire surface colorant or just as an accent border or detail. It may be used on both new and existing substrates. Typically used as flooring in restaurants and food service areas, bars, hotels, casino’s, retail stores, malls, art studios, movie theaters, museums, pool decks, automobile showrooms, residential flooring and more. Classic Stain may also be used as a means to color poured in place concrete; both smooth or with a form linear, tilt up wall, stoneface plaster, GFRC and faux rock.

Note: In some cases if a reaction cannot be achieved the substrate may need to be resurfaced with a cementitious topping such as Classic Micro Topping (indoor applications only) and Classic Stampable Overlay (outdoor applications only). The benefit to resurfacing is to provide a virgin canvas without the effect of patches, repairs, existing stains, mastics, glues, oils, etc.

Additional information

color

Adobe Tan, Arizona Buff, Brown Bag, Cafe, Cappuccino, Charcoal Gray, Chestnut, Deep Blue, Desert Tan, Espresso Black, Forest Green, French Vanilla, Latte, Mesa Buff, Metal Gray, Mission Brown, Navajo, New Concrete, Oyster Gray, Palomino, Paradise Green, Red Brick, Rosemary, Rosewood, Rustic, Sandstone, Sunflower, Terracotta, Travertine, Walnut

size

4 Ounces, 1 Quart, 1 Gallon, 5 Gallons

Reviews

There are no reviews yet.

Be the first to review “NANO-HYBRID TRADITIONAL STAIN”

Your email address will not be published. Required fields are marked *