There are 4 types of sealer finishes to choose from: Hi-Gloss, Medium Gloss, Matte and Natural Look. Each sealer serves a different purpose depending on the substrate and desired finish.
QUICK-SEAL WET LOOK ACRYLIC SEALER
Classic Quick-Seal Wet Look Acrylic Sealer is a clear single component sealer that is designed to be used over all of Classic's stains, polymer modified cement toppings, waterborne colorants, concrete, masonry, pavers, Natural flagstone and brick. Quick Seal is a waterborne acrylic with low voc and high solids. May be used for interior or exterior applications in a wide range of climates. Quick Seal provides as an excellent water repellent, UV stabilizer and will not yellow. Quick Seal is formulated primarily as a clear seal for applications over concrete restoration projects and pool deck coatings. It is ideal for where a low maintenance, easily cleanable surface is desired. It is typically applied over concrete surfaces but may also be applied as a sand joint stabilizer, provided the surface is properly prepared. Quick Seal sealer is environmentally safe and cleans up with soap and water. Caution: Surface is slippery when wet. New concrete must cure for 28 days. Available in 1 gal. jugs, 5 gal. pails and 55 gal. drum
PRO-SEAL 2000 WET LOOK HIGH GLOSS LACQUER SEALER
Classic Pro-Seal 2000 Wet Look High Gloss Lacquer Sealer clear low voc, single component, high solids solvent (acetone) base, designed to be used over most Classic Acid or water base Stains polymer modified cementitious toppings, concrete and waterborne colorants, concrete, masonry, stone, pavers, and brick. It may be used for exterior applications in a wide range of climates. Pro-Seal 2000 Wet Look has excellent UV stability and will not yellow. Pro-Seal 2000 Wet Look sealer is formulated primarily as a clear seal for applications over concrete restoration products and pool deck coatings where a low maintenance, easily cleanable surface is desired. May also be applied to Spanish tile, stucco, masonry, overlays, and natural stone, provided the surface is properly prepared. Pro-Seal 2000 Wet Look cleans up with soap and water. After two applications wait 48 hours before parking a vehicle. Caution: Surface is slippery when wet. New concrete must cure for 28 days. Available in 1 gal. jugs, 5 gal. pails and 55 gal. drums.
PRO-SEAL 5000 MATTE FINISH LACQUER SEALER
Classic Pro-Seal 5000 Matte Finish Lacquer Sealer clear low voc, single component, high solids solvent (acetone) base, designed to be used over most Classic Acid or water base Stains polymer modified cementitious toppings, concrete and waterborne colorants, concrete, masonry, stone, pavers and brick. It may be used for exterior applications (flammable) in a wide range of climates. Pro-Seal 5000 Matte finish Sealer has excellent UV stability and will not yellow. Pro-Seal 5000 Matte Finish Sealer is formulated primarily as a clear seal for applications over concrete restoration products and pool deck coatings where a low-maintenance, easily cleanable surface is desired. May also be applied to Spanish tile, stucco, masonry, overlays, and natural stone, provided the surface is properly prepared. Pro-Seal 5000 cleans up with soap and water. After two applications wait 48 hours before parking a vehicle. New concrete must cure for 28 days. Available in 1 gal. jugs, 5 gal. pails and 55 gal. drums.
SATIN MEDIUM GLOSS SEALER
Classic Satin Medium Gloss is a clear single-component acrylic sealer that is designed to be used over all of our stains, polymer-modified cement toppings, waterborne colorants, masonry, concrete, pavers, natural stone, and brick. Classic Satin Medium Gloss Sealer is a waterborne acrylic with low VOC, no fumes, low odors, and high solids. May be used for interior or exterior applications in a wide range of climates. It works as an excellent water repellent, is a high UV stabilizer, and will not yellow. Formulated primarily as a clear seal for applications over concrete restoration projects and pool deck coatings. It is ideal for where a low maintenance, easily cleanable surface is desired. Classic Satin Medium Gloss Sealer is environmentally safe, has excellent adhesion and durability, low cost, easy to install, low maintenance, and cleans up with soap and water. New concrete must cure for 28 days.
SATIN ARMOR 2K SEALER
Classic Satin Armor 2K Aliphatic-Polyurethane Sealer is a clear, 2-part component, VOC < 1g/l 63% solids, waterborne, special blend sealer that is designed to be used over all of our stains, as well as polymer-modified cementitious toppings, masonry, concrete and waterborne colorants. It may be used for exterior & interior. Satin Armor 2k provides UV stability and will not yellow. CRU repels water, oil, chemicals, and acid. It is formulated primarily as a clear sealer for durable protection over concrete restoration projects and is low maintenance. It is typically applied with a 9”x1/2” nap roller with a 1-hour pot life, provided that the surface is properly prepared. Satin Armor 2K is environmentally safe and cleans up with water. Also available in high gloss or in a matte finish. Color additives are also available in solid colors and metallic colors. Caution: Sealers may be slippery when wet. If desired, add Classic Gator Grip slip resistance during the second application only. New concrete must cure for 28 days before sealer is applied. FOR PROFESSIONAL USE ONLY.
HIGH GLOSS ARMOR 2K SEALER
Classic High Gloss Armor 2K Aliphatic-Polyurethane Sealer is a clear, 2 component, VOC < 1g/l 63% solids, waterborne, special blend sealer that is designed to be used over all of our stains, as well as polymer-modified cementitious toppings, masonry, concrete and waterborne colorants. It may be used for exterior & interior. High Gloss Armor 2k provides UV stability and will not yellow. CRU repels water, oil, chemicals, and acid. It is formulated primarily as a clear sealer for durable protection over concrete restoration projects and is low maintenance. It is typically applied with a 9”x1/2” nap roller with 1-hour pot life, provided that the surface is properly prepared. High Gloss Armor 2K is environmentally safe and cleans up with water. Also available in matte or in a satin finish. Color additives are also available in solid colors and metallic colors. Caution: Sealers may be slippery when wet. If desired, add Classic Gator Grip slip resistance during the second application only. New concrete must cure for 28 days before sealer is applied. FOR PROFESSIONAL USE ONLY.
MATTE ARMOR 2K SEALER
Classic Matte Armor 2K Aliphatic-Polyurethane Sealer is a clear, 2-part component, VOC < 1g/l 63% solids, waterborne, special blend sealer that is designed to be used over all of our stains, as well as polymer-modified cementitious toppings, masonry, concrete and waterborne colorants. It may be used for exterior & interior. Matte Armor 2k provides UV stability and will not yellow. CRU repels water, oil, chemicals, and acid. It is formulated primarily as a clear sealer for durable protection over concrete restoration projects and is low maintenance. It is typically applied with a 9”x1/2” nap roller with a 1-hour pot life, provided that the surface is properly prepared. Matte Armor 2K is environmentally safe and cleans up with water. Also available in high gloss or in a satin finish. Color additives are also available in solid colors and metallic colors. Caution: Sealers may be slippery when wet. If desired, add Classic Gator Grip slip resistance during the second application only. New concrete must cure for 28 days before the sealer is applied. FOR PROFESSIONAL USE ONLY.
POLYURETHANE ACRYLIC WET-LOOK HIGH GLOSS SEALER
Classic Coatings Polyurethane-Acrylic Wet-Look High Gloss Sealer is a clear, single component, low VOC, high solids, waterborne, special blend sealer that is designed to be used over all of our stains, polymer-modified cementitious toppings, concrete, and waterborne colorants, concrete, masonry, and sealers. It may be used for exterior & interior applications in a wide range of climates. Classic Polyurethane/acrylic seal is a UV stabilizer and will not yellow. It is formulated primarily to work as a top layer for protection and applies over concrete restoration projects and where a low-maintenance job is desired. It is typically applied with a sprayer or 9”x1/2” nap roller, provided that the surface is properly prepared. It is environmentally safe with low VOC and cleans up with soap and water. Available in clear or solid colors. Caution: Surface is slippery when wet. New concrete must cure for 28 days before the sealer is applied.
MATTE SEALER
Classic Matte Sealer is an acrylic, single-component sealer that is designed to be used over all of our stains and on polymer-modified cement toppings, waterborne colorants, concrete, brick, masonry, pavers, Spanish tile, stucco, and natural stone. Be sure to properly prepare surfaces before applying. Classic Matte Sealer is a waterborne acrylic with low voc, no fumes, low odors, and high solids. May be used for interior or exterior applications in a wide range of climates. It is an excellent water repellent, provides high UV stability, and will not yellow. It is formulated primarily as a clear seal for applications over concrete restoration projects and pool deck coatings. It is ideal for where a low maintenance, easily cleanable surface is desired. It is environmentally safe, has excellent adhesion, durability, low cost, easy to install, and cleans up with soap and water. Available in 1 gal. jugs, 5 gal. pails and 55 gal. drums. Slippery when wet. Add Classic Gator Grip to combat slipperiness. New concrete must cure for 28 days.
Paver Bond
Classic Paver Bond Wet-Look seals & protects pavers from UV degradation & fading. It is environmentally safe with low VOC and cleans up with soap and water. Paver Bond is a single-component, state-of-the-art formula that makes it easy to apply. It darkens the pavers with a wet look & medium Sheen. It is designed for deeper penetration by sealing and interlocking concrete pavers and by stabilizing joint sand that locks it in place. It can enhance color & also be used for porous brick, flagstone, slate & porous concrete. Paver Bond can be resealed years later without stripping by clearing the surface with a pressure washer 2700 PSI. Paver Bond stops sand from being washed away due to regular cleaning and rain. For interior and exterior use. CAUTION: May be slippery when wet. To combat this, we highly recommend adding Classic Gator Grip during the second application of Paver Bond with a 9” nap roller from 3/8” to 1/2”.
MULTI-DENSIFIER
Classic Multi-Densifier is a low VOC, water-based penetrator sealer that is applied to concrete surfaces in order to fill pores and increase surface density. Classic Multi-Densifier can be used on polished and non-polish concrete to reduce dusting and wear. Classic Multi-Densifier has a low to medium sheen and can also be used on driveways, walkways, pool coping, and concrete countertops. Helps with efflorescence and is ideal where a low-maintenance, easily cleanable surface is desired. Classic Multi-Densifier is environmentally safe, has excellent penetration and durability, low cost, easy installation, and low maintenance. For use indoors and outdoors. Sold in 5-gallon pails. New concrete must cure for 28 days before application. Available in 1 gal. jugs, 5 gal. pails and 55 gal. drums.
INVISIBLE SHIELD 2000
Invisible Shield 2000 is a clear, natural look, penetrating sealer & enhancer. It is a single-component, low VOC, waterborne Sodium Methyl silicate sealer designed to be used over Classic acid stains, pavers, concrete, stucco, Spanish tile, masonry, stone, and brick. It may be used for interior or exterior applications in a wide range of climates. Invisible Shield 2000 has excellent UV stability and will not yellow, chalk, or peal. Invisible Shield 2000 is formulated primarily as a penetrating clear sealer for applications over concrete restoration products and pool deck (not slippery) coatings where a low maintenance, easily cleanable surface is desired. It is environmentally safe and cleans with water. New concrete must cure for 28 days before sealer can be applied..
CLASSIC GATOR GRIP
Gator Grip is a finely ground polymer material for addition to concrete sealers for slip resistance and fine texturing. This additive can be added to most film-forming water-based and solvent-based sealers. Gator Grip provides improved chemical and abrasion resistance. It is more comfortable to bare feet on treated surfaces than sand or aggregate additives. The product's low density and insolubility characteristics will help reduce settling and provide optimum performance in its various applications, all without changing the viscosity. When a slip-resistant surface is desired, Gator Grip puts “bite” on concrete surfaces and is ideal around properly prepared areas where water or moisture can accumulate. This includes walkways, driveways, garage floors, patios, pool decks, and other surfaces.